Самосвал

STAS AgroStar 47,3 cbm Alu-Kippsattelauflieger

AGROSTAR - V080 - SLOPING FRONT WALL - VERTICAL REAR DOOR

Interior length body: 8880 MM
Interior width body: 2460 MM
Interior height body: 2165 MM
Body volume: 47.3 cbm
GVW: 36 T
Center distance: 1310 MM
Saddle height: 1150-1230 MM

1. FRAME
* FRAME !!! LIGHT CHASSIS !!! The I-beams of the frame are composed of a double "T" profile. Two fully automatically welded I-beams with fully welded cross members (high-quality alloy). Frame in flat design. Chassis width 1400 mm. The flange width of the I-beams is 200 mm. Top 15 mm thick, bottom 12 mm thick. Welded cross members with extra reinforcement at the tilting pivot point to achieve maximum stability.
* The exact saddle height is 1175 mm.
* Triedem axles, make: JOST (EX-MERCEDES) = MANUFACTURER'S CHOICE Capacity: 3 x 9 T Suspension: Original JOST air suspension Brakes: large disk - K-brake Press-in depth: ET 120 Brake wear indicator: with
* The first and third axles are automatic lift axles. (automatic lifting when empty, automatic lowering when loaded). The lift axles are controlled via the EBS-E system. Both axles lift separately. The third axle is equipped with OPTITURN.
* Automatic lowering of the air suspension during tipping. The door locking hooks are opened automatically during tipping (can be locked by means of a tap on the frame).
* Aluminum air reservoir
* ALCOA DURA BRIGHT. ET 120.
* Aluminum drop lift supports, type STAS. Each side is to be used individually. The truck should be equipped with air suspension.
* EBS-E system WABCO 4S/3M. 2-line air brake system in accordance with CE guidelines. Spring-loaded parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System).
* ASPÖCK 24 volt electrical equipment. 2 x 7-pin + 1 x 15-pin sockets ISO connection. Aspöck set. Side : orange LED lighting. Rear : 2 x 1 five-chamber LED light - ECOLED II (Full Nordic). Rear and front outline marker lights : LED lighting.
* Folding underride guard (manual)
* Hydraulic ram with Rotulen mounting, make HYVA (model FE 169). Low pressure.

ACCESSORIES
* A-plate in the upper area of the number plate holder
* 3 holders for brush, shovel and scraper in the upper area of the axles.
* Air connection mounted at the rear of the frame
R8Rjh0Sk8R
* 1 ferry eyelet on the left
* Aluminum ladder (3m), mounted on the right.
* PVC TOOLBOX with key (830 x 470 x 480 mm).

2ND MULDE
* Rectangular tipping trough made of aluminum. Side walls in smooth finish.
* Side walls in smooth finish inside and outside. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version).
* A single 8 mm high wear-resistant floor panel with 100 mm high cross member across the entire width.
* Rear door 2/3 (left) - 1/3 (right) made of 4 mm aluminum sheet and reinforcement profiles.
* The tipping trough is provided with swivel bows : Type : bent round aluminum tube - Ø 70 mm Number : 3 (+ 1 extra bows support in the middle)
* Roller tarpaulin with the following features: Left: 3 tensioning straps Right: with piping strip in the top strap pulled Quality: approx. 680 g (standard)
* With tarpaulin holders: 3 x right and 3 x cranked.
* Tensioning gear with handle on the underside of the superstructure.
* Aluminum round profile for sealing the rear door.
* Grain outlet with dust bag

All information without guarantee. Errors excepted. Prior sale possible.

Обявата е преведена автоматично и може да има някои грешки в превода.